|
Weight per square foot
Matt - 17g / Satin - 17g / Glossy & Metallic - 17g / Translucent - 17g
Track weight per linear foot - 12grams
Acoustic Properties
Absorption coefficients for typical installation using standard flat stretched materials with minimum 50mm thermal insulation above. Frequency (Hz) 63 125 250 500 1000 2000 4000
Absorption Coefficient 0.1 0.5 0.47 0.57 0.44 0.23 0.17
Thermal reflection factor NH/PTH
Matte - 0.16 / Satin - 0.16 / Glossy & Metallic - 0.15
Thermal emission factor ESPIL
Matt - 0.84 / Satin - 0.84 / Lacquer & Metallic - 0.85 / Suede - 0.82
Antistatic
Typical average for Glossy - 4.10 at 11ohms
Light reflectance and transmission Color/Finish Reflectance % Transmission %
White lacquer 78.8 9.6
White Matt 81 9.8
Translucent 39.2 75
Hygiene Typical Microbiological Trial
14 DAYS - chlorinated solution wipe after 7 days - inoculated Bacterium - E. Coli, Listeria, Salmonella, Yeast, Mould - NONE DETECTED.
General
Ceiling sheet thickness nominal 0.2mm and is manufactured in roll form with ultrasonic flush welded joints at approx. 58 inch centers, aluminum semi concealed track. Track can be heat bent to match curved profiles. Aluminum track non-anodized or anodized to 20 microns with a serrated type to create curved profiles or to form three dimensional shapes, domes or vaults.
Air Movement
All air handling equipment within Stretch Ceiling installed areas must be balanced to prevent ceiling movement and possible damage.
Cleaning
Use non abrasive cleaners and polish. Ask about our cleaning products.
|
